About this item
- 【Automatic & Safety】This shoe cover machine does not need to connect batteries and power cords, it is safe and efficient. No need to bend over to save time. It keeps your floors clean and tidy. With this shoe cover machine, floors and carpets can be greatly protected without cleaning the floor. The best way for tourists to cover their shoes.
- 【 High-Efficiency 】This shoe cover machine has a mechanical spring, a very convenient and excellent design, just press the middle of the shoe cover machine hard, and the buckles at the four corners will automatically release a disposable boot bag so that the shoe cover completely wrap your shoes. No need to bend down to save time. A very convenient and excellent design.
- 【Keep Clean & Portable】Our shoe film machine can keep your floor clean and neat. Using this shoe cover machine, you can greatly protect floors and carpets, and no need to clean the floor. In addition, this shoe cover machine does not need to connect a battery and power cord, so it is very convenient to carry to wherever it is needed.
- 【Wide Application】Our automatic shoe cover dispenser is suitable for all types of shoes, ideal for home as well as commercial use, such as office, shop, supermarket, lab, and so on, You can use it for indoor and outdoor, it keeps your shoes and floor clean. protects carpets and is handy to put in the boot of the car to protect Car Flooring. No electrical source required can be also used on building sites, yacht repair yards, etc.
- 【100% Guaranteed Quality】 All of our products are put into the market after rigorous testing. Any doubts, please feel free to contact us, we provide friendly customer service forever and will reply within 24 hours.
- Each shoe molding machine is equipped with a roll of shoe film (about 500 times used)
- Anti-skid design on the bottom makes the shoe molding machine more stable
- Easy installation, environmental protection, sanitation, suitable for use in a variety of venues
- Foot part can be disassembled and cleaned
- Packing size: 60*20*30cm/23.62*7.87*11.81in
- Product size: 54*24*18cm/21.26*9.45*7.09in
- Gross weight: 3kg(6.61lb)
- Material： ABS
- Scope of application: hospital kitchen, family living room, hotel, dust-free workshop, the elderly and children can use
Shoe Mold Installation Steps:
- Step 1: Open the head cover of the shoe mold machine
- Step 2: Remove the sleeve and install the shoe film into the sleeve
- Step 3: Snap the shoe film sleeve into the head of the shoe film machine
- Step 4: Cover the panel to complete the installation
- Step 5: Pull the shoe film sleeve out of the sleeve
- Step 6: Complete use
Steps for Usage:
- step1: step on the foot slightly, so that the shoe film covers the entire sole
- Step 2: Confirm that the shoe film is attached to the sole, lift the foot and pull it back
- Step 3: Pull the tip of the shoe to the top of the pedal switch and step on the pedal, pull it down at a 45-degree angle, and cut off
- 1*Shoe Cover Dispenser
- 1*set of shoe Covers
- 1*outer carton (6 sets/carton)